How to strengthen the signal of the router?

Every person in the world uses the Internet every day. Wi-Fi has become an integral part of work, study, and entertainment. Many are faced with a weak router signal, despite the fact that the internet provider's speed corresponds to that declared when connected via cable. We propose to consider the reasons and solutions for the unstable operation of a Wi-Fi device.

Reasons for a weak signal

Location of the router

As a rule, the main reason can be the wrong location. It is advisable to install it in such a place that the range of the wi fi router is not obstructed by something (for example, a load-bearing wall, cabinet, etc.). Also, the equipment should not be hidden in a closet - it should be in an open space.

Lack of up-to-date firmware

Lack of software update may affect wifi range and internet signal.

Not a suitable native adapter

If the previous methods were not entirely effective, buy a separate adapter that can amplify the Wi-Fi signal. When buying equipment, pay attention to removable elements, which, if something happens, can be replaced with more powerful ones.

Failure to comply with security measures

A long-range Wi fi router is good, but it often happens that neighbors connect to your device, which leads to a decrease in Internet speed and other consequences. You must enter a strong password to access the equipment.

Defective antenna

One of the reasons may be a faulty antenna for amplifying wi fi, which is installed on the router. If your device has a removable antenna, you need to change it to a more powerful one. So the antenna will replace the wifi signal amplifier for the router.

The manufacturer of the router

It is very important to install a powerful wifi router, the radius and range of which will correspond to the declared speed and your expectations. We recommend popular brands of routers that will not make you think about how to amplify the Wi-Fi signal - these are TP-LINK, Mercusys or MikroTik, which you can find on our website in the "Equipment" section.

Ways to Strengthen Internet Signal

In this section, we will tell you how to amplify the signal of the router and which methods are exactly right for you in this matter.

Minimize the use of household appliances near the router

Oddly enough, the Wi-Fi signal can be interfered with by household appliances that are near the router. In order to check which one - turn off each of the devices in turn and pay attention to whether the router signal changes. So you can roughly understand what exactly affects the signal and make sure that the point is not at all that there was some kind of technical problem.

Change the location of the router

Yes, sometimes signal problems arise due to the fact that the router is in the wrong place. Determine a central and high point in the room where you can install the modem.
So, the signal will finish off to all corners of the room and you will be able to use any of the devices at home without interruption.

Change the channel of the Wi-Fi modem

Go to the router's web page and open the Wi-Fi settings there and in the "Channel" item, set the desired value, and then save the changes. IMPORTANT! When you change the settings of the wireless network, the connection will be disconnected for a couple of seconds, but this is only if you were previously connected via Wi-Fi.

The listed methods are quite simple and do not require the purchase of additional equipment. Plus, you can implement them at home without any special skills in setting up.

Strengthening the Internet Signal by Configuring Your Router

In this section, we will look at how to increase the wifi radius while using an accessible and simple method for setting up a router.

It is based on the standard for wireless networks that operate in b / g / n mode. All new routers are configured according to the modern 802.11ac standard, but the outdated 802.11n can also increase the speed and radius of the wireless network, but this will only work if the router has more than one antenna and it accurately supports these standards.

Changing the mode settings is quite simple:

1. Settings at the router address: 192.168.1.1
2. Go to the Wireless section.
3. Go to Mode - "Wireless network mode".
4. Select the value N only - Save.
5. After all the manipulations, restart the device.

Additional devices to enhance the Wi-Fi signal

We have listed quite a few methods, but you can purchase additional devices that will increase the range and radius of the Wi-Fi wave.

Install a repeater

Such a device is also called a "repeater", which receives the signal from the router and allows you to amplify its power. The repeater in appearance resembles a block that needs to be plugged into an outlet and, after a minimal setting, will enhance the wi-fi signal.

Purchase of a wifi amplifier - a booster

The booster is connected to the modem and thanks to it you can increase the strength of the range. We advise you to use a bi-directional "Booster", which will increase the speed of the wireless network. Such a device is suitable for all broadcast standards, increases the signal to the very edge of the coverage and is absolutely safe to use without causing any damage to the equipment.

Change the standard antenna of the router

If the problem lies in the antenna of the router, it is enough to simply unscrew it, if possible, since not all routers have this capability and replace it with a more powerful antenna.

We hope that after this article, you will no longer need to look for a wifi zone expander and study information on how to strengthen the Internet signal. Finally, we advise you to choose high-quality equipment that will allow you to enjoy the Internet without interruptions.