Setting up TV on LG

Setting up digital television (DVB-C) using the example of LG 32LK330

 

To enter the TV "menu", press the "HOME" button on the remote control (remote control) and select "Settings".

 

 

Then the item "Digital cable setup",

 

 

It is necessary to select in the line "Customer service operator" -> "Other operators", "Channel auto-update" -> if you put "On", then the TV itself will update (reconfigure) channels in the future, i.e. if the operator deletes or includes new channels, then you do not need to do a second "Autosearch", all the channels you have will be displayed automatically, but the selected playlists and the order of the channels will get confused.

 

 

Go to the item "Autosearch" -> "Cable".

 

 

 Then select "Fast" and click "Settings".

 

 

 Configuring the parameters:

• Initial setting is On
• Frequency - 346000
• Character rate - 6875
• Modulation - 256QAM
• Starting frequency - 346000
• End frequency - 802000

 

 

Then click "OK"

 

 

and "Run".

 

 

Next is the search process. At the end of the search, you can switch to view mode.

 

Time setting

 

The accuracy of the display of the electronic program guide (EPG) depends on the correct time. Press the "HOME" button on the remote control, then select "TIME".

 

 

Go to the "Clock" item.

 

 

Set "Auto", "Time zone" -> "Offset", and set the time zone depending on winter (GMT + 2) or summer time (GMT + 3).

 

 

Checking the card subscription status and updating the CONAX SMIT module

 

To view the card subscription for the current month, you need to press the "HOME" button on the remote control, select "SETTINGS" -> "CI Data"

 

 

Then Subscription status. We find "Conax 6" and "Conax 7", in them you can see if there is a subscription for the current month. You can view the firmware version of the module by pressing the "HOME" button on the remote control, select "SETTINGS" -> "CI data" -> "About Conax CA". If you have the firmware in the module below 2.8.2.4, then I recommend updating. To do this, select the "SETTINGS" -> "Manual settings" item and enter the parameters: Frequency - "346000" Symbol rate - "6875" Modulation "256" and click "Update".

 

 

We go to the viewing mode and find the channel "Start Service".

 

 

On this channel, you need to leave the TV, a window should come out in which there will be information about the new firmware, the download will begin (about seven minutes), IN THIS TELEVISION CANNOT BE SWITCHED OFF OR SWITCHED TO OTHER CHANNELS. After the TV will reboot and you can use it normally.

Setup completes.