New ASUS Routher Interface

Attention! Do not connect the Briz cable to the router and computer until the setup is complete.

Connect the router to the computer using the included meter cable. The cable must be plugged into any of the four free LAN ports and the network card of the computer, which had the Briz cable.

In order to configure the router, you do not need to use the disk that comes with the router. You need to open any browser (for example - Internet Explorer, Mozilla or Opera) and enter the following address in the address bar of this program: http://192.168.1.1 and go to the page. You will be presented with an authorization window, in which there are two fields: "User Name" and "Password". By default "User Name" is admin and "Password" is also admin.

Changing the IP address of the router

Now go to the "Local network" - "LAN IP" section. Here you need to change the IP-address of the router "192.168.1.1" to "192.168.0.1" (required).

New ASUS Routher Interface,1 - Internet provider Briz in Odesa

After updating the IP address of the router, we return to the settings page at the new address: http://192.168.0.1, where we again enter the login\password.

Internet connection setup

Let's proceed directly to setting up the connection. Go to the "Internet" section and select the "Connection" subsection.

  • Select "WAN Connection Type" - "PPPoE".
  • We put (if not) the point "Obtain WAN IP address automatically?" - "YES".
  • We put (if not worth it) the point "Connect to the DNS server automatically?" - "YES".
  • "Username" and "Password" enter your username and password on the Internet.

New ASUS Routher Interface,2 - Internet provider Briz in Odesa

We save the changes by clicking the "Apply" button.

Setting up a wireless network (WI-FI)

Go to the "Wireless network" section. Here we set on the "General" tab:

  • "SSID" - The name of your network to which your devices will connect.
  • "Authentication Method" - "WPA2-Personal".
  • WPA Encryption - AES.
  • "Pre-shared WPA key" - specify the password for connecting to the network (can be any).

New ASUS Routher Interface,3 - Internet provider Briz in Odesa

We save the changes by clicking the "Apply" button.

Setting up communication with the router

Go to the "Firewall" section.

  • We put (if not worth it) the point "Answer ping requests from the WAN?" - "YES".

New ASUS Routher Interface,4 - Internet provider Briz in Odesa

We save the changes by clicking the "Apply" button.

Change the binding to the device

You can either provide the MAC address of the router to tech support (recommended), or you can clone the MAC address.

  • If you decide to tell the MAC address of the router to technical support, turn the router over, find the "MAC" code (12 characters) on the sticker under the barcode and report it to the technical support. Or you can change "MAC" yourself in your personal account.
  • If you decide to clone the MAC address of your computer and assign it to the router (thereby not calling technical support) - click "Clone MAC" in the "Internet" section ("Connection" tab). At the same time, you need to press the "Clone MAC" button only if you configure the router by connecting it with a cable to the computer to which the Internet was originally connected.

New ASUS Routher Interface,5 - Internet provider Briz in Odesa

The router configuration is complete.

Контакти служби підтримки

Помічник від «BRIZ» в Telegram

  • Ви зможете переглядати інформацію по ваш обліковий запис
  • Ви зможете змінювати MAC-Адреса вашого пристрою
Приєднуйтесь до нас в Telegram
Контакти служби підтримки - інтернет-провайдер Briz в Одесі