5 Steps to Stable GPON: How to Avoid Speed Drops and Dropouts

How to make your GPON internet stable?

Today, GPON technology has become the best choice for those who appreciate fast and reliable Internet. GPON is an opportunity to enjoy a high-quality and energy-independent connection even under high loads on your network. But it also happens that modern GPON terminals face interruptions or speed drops. Not to mention when GPON simply doesn't work without power.

In this article, we will explain how GPON internet works and what affects its stability, share 5 simple steps to improve your connection. We will also tell you what to look for when choosing a provider with GPON technology.

GPON: a brief overview of the technology

GPON (Gigabit Passive Optical Network) is an advanced technology for connecting to the Internet by fiber optic cable that provides high-speed connection and stable communication without speed loss or failures. GPON Internet is not only fast, but also reliable, allowing you to provide high-quality communication even in the most difficult conditions.

The main advantage of GPON technology is that it doesn't require any active equipment on the route, which makes it an economical and reliable option. That is, GPON fiber optic Internet can operate without power. It is necessary that the provider's equipment, as well as all your Internet devices, be provided with backup power. It also does not lose signal over long distances, which allows you to use the connection even in remote areas. 

GPON providers can easily branch out their networks to connect new users by using special signal splitters. With GPON technology, you can receive not only the Internet, but also cable TV, IPTV, and SIP telephony - all through a single GPON optical terminal.

How speed drops affect clients

Speed drops can be a significant inconvenience, especially if you use GPON services for work, school, or entertainment. Instability affects everything, reduces efficiency, and causes problems with streaming video, online gaming, or downloading files.

The reasons for such fluctuations can be varied: from a poor optical signal to network congestion or poor connection. The problem can also be caused by an incorrectly selected power supply for your GPON terminal. 

To prevent this issue, you need to properly configure the fiber optic network and be sure to check the quality of the connection to your GPON provider. We recommend that you immediately contact technical support for advice. 

5 steps to a stable GPON connection

1. Use the recommended equipment 

Each GPON provider has its own specifics of building an optical network, which is why the equipment can be used completely different. For example, Briz Internet provider uses optical terminals to ensure the operation of GPON Internet. They perfectly fit the structure of our network and provide a stable connection.

If you decide to install your own GPON terminal, the setup and installation are performed only by Briz technicians to ensure compatibility and correct operation of the equipment. In addition, it is very important to use a power supply or UPS that matches the parameters of your equipment. This will help to avoid failures and ensure the stability of the GPON Internet even in the face of power outages.

2. How to connect fiber optic internet correctly

Connecting the Internet is simple, but it requires attention to detail. If you have a private house, avoid running the cable through trees, branches, or other obstacles that could damage your optical cable. In apartments, do not pull the cable through remote rooms or leave it on the floor, because pets can easily chomp on it.

Even a small bend or crack in the cable affects the operation of the GPON terminal: the signal may become unstable or disappear altogether. To ensure that the GPON connection works perfectly, it is better to entrust the installation and configuration to professionals.

3. Internet without power

GPON does not work when there is no light? This is a problem that occurs when there is no backup power for the optical terminal and router. If you do not have a UPS, then your GPON internet will not work without power.

To avoid this, it is worth investing in a high-quality backup power supply that will allow you to continue using the GPON service even in the absence of electricity, with maximum stability and continuity.

On the website of the BRIZ Internet provider, in the "Equipment" section, you can find everything you need for your GPON Internet.

4. Check if your provider meets the standards of GPON technology

When choosing a provider for GPON Internet, it is important to clarify whether it supports its operation without power. Some providers will not guarantee this feature or provide it only for a couple of hours. 

To make sure that a GPON provider is reliable, we recommend contacting several companies, checking the details and whether everything is true, and reading online reviews. But most importantly, remember that Briz guarantees the reliability and stability of your GPON services in any conditions, even when there is no electricity.

5. Keep the optical network in good condition

For the stable operation of GPON Internet, it is important not only to follow the previous recommendations, but also to create order with Internet devices. The GPON optical terminal should be located in a place that is accessible only when needed. A shelf, cabinet, or enclosed space, such as a metal panel, is best. All devices should work autonomously, without your intervention and manual reconnection of cables.

You can check the network status and clean the equipment from dust, but excessive intervention without the necessary knowledge can lead to malfunctions.

Connect fiber optic Internet from Briz without any troubles

For stable operation of GPON Internet, it is important not only to organize all devices correctly, but also to choose a reliable provider that guarantees a high-quality connection and network stability.

Briz offers the most modern equipment for connecting home Internet, including routers and optical GPON terminals. We provide professional installation and turnkey services, so your network will work autonomously and you won't have to interfere with its operation.

Connection to a provider using GPON technology in Odesa and Odesa region costs from 300 UAH. Contact us to get reliable Internet, modern equipment, and the highest level of service! 

"Briz" is about speed, reliability, care and comfort for every subscriber.
Connect