Blue D-Link Routher Interface

ATTENTION: IPTV does not work on standard firmware 1.3.0 due to lack of support for Dual Access technology.

 

You need to connect the router to the computer using the included meter cable. The cable must be plugged into any of the four free LAN ports and the computer's network card.

To configure the router, you do not need to use the disk that comes with the router. You need to type the address http://192.168.0.1 in the address bar and go to the authorization page with the fields: "Login" and "Password". By default "Login" is admin and "Password" is also admin.

 

Blue D-Link Routher Interface,1 - Internet provider Briz in Odesa

Internet connection setup

 

Let's proceed directly to setting up the connection. Press the button "Configure manually".

 

Blue D-Link Routher Interface,2 - Internet provider Briz in Odesa

 

Go to the "Network" - "WAN" section.

We select the existing connection and proceed to the configuration. If the table is empty, click the "Add" button.

 

Blue D-Link Routher Interface,3 - Internet provider Briz in Odesa

 

  • Select "Connection Type" - "PPPoE".
  • In the "Username" field, enter your Internet login.
  • In the "Password" and "Password confirmation" fields, enter your Internet password.
  • We select "Authentication Algorithm" - "CHAP".
  • Uncheck (if checked) the "Connect on demand" checkbox.
  • We put (if not) the checkbox "Enable IGMP".

 

Blue D-Link Routher Interface,4 - Internet provider Briz in Odesa

We save the changes by clicking the "Save" button.

Setting up a wireless network (WI-FI)

Go to the "Wi-Fi" - "General settings" section. Here we check the box "Enable wireless connection".

Blue D-Link Routher Interface,5 - Internet provider Briz in Odesa

We save the changes by clicking the "Change" button.

Go to the section "Wi-Fi" - "Basic settings" In the "SSID" field, enter the name of your network to which your devices will connect.

 

Blue D-Link Routher Interface,6 - Internet provider Briz in Odesa

We save the changes by clicking the "Change" button.

Go to the section "Wi-Fi" - "Basic settings". Select "Network authentication" - "WPA-PSK / WPA2-PSK mixed" and enter your password (any) in the "PSK encryption key" field.

Blue D-Link Routher Interface,7 - Internet provider Briz in Odesa

We save the changes by clicking the "Change" button.

Change the binding to the device

Go to the "Network" - "WAN" section. We select the existing connection and proceed to change it. In the “Ethernet” subsection, we find an item with the value: “MAC”. Here you need to inform the technical support of the router's MAC address. Or you can change "MAC" yourself in your personal account.

The router configuration is complete.

Контакти служби підтримки

Помічник від «BRIZ» в Telegram

  • Ви зможете переглядати інформацію по ваш обліковий запис
  • Ви зможете змінювати MAC-Адреса вашого пристрою
Приєднуйтесь до нас в Telegram
Контакти служби підтримки - інтернет-провайдер Briz в Одесі