1. Connect the incoming Briz cable to the first socket of the router and connect the router to the computer with the cable.
2. Go to the page http://192.168.88.1. In the Login field, write admin and click the Login button. Then, at the top right, switch to the Quick Set.
3. In window:
- We select the Home AP mode;
- Setting up an Internet connection:
in Address Acquisition, we put the point PPPoE;
in the PPPoE User and PPPoE Password fields, specify the login and password from the Internet agreement.
4. Setting up a wireless network:
- in the Network Name field, enter the name of your WiFi network (whatever you think of);
- in the Country field, specify ukraine;
- in the WiFi Password field, specify the WiFi password (it does not have to match the password for Internet access);
- check the UPnP checkbox;
- in the Password and Confirm Password fields, specify the password for accessing the router;
- we save the settings with the Apply Configuration button;
- next, you need to tell the technical support the value from the MAC address field. Or you can change the MAC address yourself in your personal account.
5.
- switch to WebFig mode (top left);
- on the left in the vertical menu, select IP. In the list that appears, select DHCP Client;
- click the Add New button.
6.
- оn the page that opens, put a check mark in the Enabled fields;
- we save the settings with the OK button.
7.
- select on the left in the IP column - Firewall;
- on the NAT tab;
- click the Add New button.
8.
- out. Interface select ether1;
- action select masquerade;
- we save the settings with the OK button.
9. Click the Add New button again.
- out. Interface select pppoe-out1;
- action select masquerade;
- we save the settings with the OK button.
The router configuration is complete.
